METAL PRIMER + UNDERCOAT

Product Description

A rust inhibiting primer for all bare ferrous metal surfaces, Farrow & Ball's Metal Primer + Undercoat is designed to create a smooth foundation on gates, railings, furniture, radiators and metal downpipes before using Exterior Eggshell, Estate Eggshell, Full Gloss or Dead Flat.

USE:  Thoroughly clean and degrease new and previously painted metal surfaces. Remove any weak paint and rust back to bare metal. Apply two coats of Metal Primer + Undercoat in the correct colour tone for your top coat. Allow a minimum of 4 hours drying time between coats. Follow up with two coats of your chosen Farrow & Ball top coat finish, allowing the correct drying time between coats.

• For interior + exterior bare metal applications
• Eco-friendly, low VOC
• Water based, low odour 
• Easy to clean up – wash brushes in warm soapy water
• Tin sizes available - 0.75L (approx. coverage 95ft²)
• Drying time - 4 hours in between coats

Farrow & Ball Preparation Products Product Advice Sheets

END OF LIFE:  Wash out empty paint tin with warm soapy water and dispose as metal recycling.

Ethically made in England.